Объявление Гранулятор пеллет Wektor BT60 продано и не участвует в поиске!
Похожие объявления
гранулятор пеллет Wektor BT60
Продано
гранулятор пеллет Wektor BT60
гранулятор пеллет Wektor BT60 изображение 2
гранулятор пеллет Wektor BT60 изображение 3
гранулятор пеллет Wektor BT60 изображение 4
1/4
Тип:  гранулятор пеллет
Год выпуска:  2018
Место расположения:  Польша Zielona Góra
Дата размещения:  более 1 месяца
Machineryline ID:  EX31686
Состояние
Состояние:  б/у

Дополнительная информация — Гранулятор пеллет Wektor BT60

Английский
EN

WEKTOR BT-60
Used briquettes press for sale
Electric motor 22kW
According to the manufacturer also suitable for Woodpellets with a diameter of 7-8mm
Polish, old construction BT-60, sold for many years in many countries of the world by the company Wektor from Toruń – manufacturer from Poland.
Constructively it is a crank press, the manufacturer promises that it is suitable for briquettes and pellets
Purchased by the manufacturer in 2018 as new with two years warranty – used body – built in 2009, all other components were new according to manufacturer specifications
The machine worked for several months, several hours per day depending on requirements – less than 200 hours in total
Owner tried to produce 6mm pellets from sawdust
Manufacturer supplied the user with 5mm, 6mm, 7mm, 11mm dies and 60mm briquette pipes
Unfortunately, some of the dies broke during use and the screws fastening the dies broke off.
During the failure of the type of broken screws fastening the matrix, cracks occurred in the main molding sleeve and the lateral material feeding sleeve.
These are very expensive failures because they need to repair the purchase of a few extra parts
The failure occurred several times, so it can be assumed that the design of the machine is not well thought out.
The absence of the machine is, for example, a tear-off protection, which is common with similar machines (which is often used in crank presses working on the same principle).
Due to the lack of this device, possible defects drain the bag (torn bolts to fix the head unit, broken pellet dies, which also occur in the event of failure of damage to the shape and feed sleeve of the processed material).
There is no brake on the crank system, so that in the event of a failure the device completely destroys the attachment of the head due to the force of inertia.
The machine may be suitable as a briquetting press, but it is completely unsuitable for producing 6mm and 8mm pellets (DIN/ISO) from sawdust.
The manufacturer declares that the user is responsible for the failure, so no warranty and warranty repair or return of the machine can be granted.
According to the user, the machine is completely unsuitable for producing 6mm and 8mm pellets (DIN/ISO) from sawdust.
The contract of sale contains imprecise, ambiguous provisions that place the buyer in an inferior position during a court hearing.
It is unclear whether a machine is a prototype or not, the manufacturer disagreed with this definition in court, but everything indicates that the user is a guinea pig. . .
Piston impacts against the pellet matrix and thus the front wall of the body cause cyclic elastic deformation in the range of 1-2 mm
It is NOT possible to produce wood pellets of class DIN/ISO – diameter 6mm or 8mm length 3,14-40mm
There is no way to control the length of the pellets by a crusher (unless the company has already found a way or is still in the test phase – read the prototype. . . )
The manufacturer uses vague, ambiguous designations, i. e. 4-6mm or 7-8mm, which means that the user is unable to prove its accuracy in court.
The machine does not have a pellet cutter, so the pellet length comes out randomly and the user cannot control it
Among other things, the manufacturer added a 7mm hole matrix to produce 7-8mm wood pellets – 7-8 is not a DIN – DIN is 6mm or 8mm
The machine does not produce wood pellets DIN 6mm or 8mm that can be certified.
The machine is therefore useless and only a waste of money.
In spite of the delivery of the 6mm die, the manufacturer insisted that he sold the machine for producing pellets min 7-8mm, which on the contract of sale, i. e. – printed record – diameter 6mm and crossed out to 7mm
The purchase contract says something different and a different advertisement of the manufacturer, who even promises diameter of wood pellets 4-6mm
The manufacturer insists that he sold the machine for working with the 7mm matrix – only who buys the 7mm pellets? Who certifies 7mm pellets?
The machine performance for the production of wood pellets 6mm is meagre 180-220kg/h – the manufacturer even promises about 350kg/h, which is not true
The manufacturer tells us to use sawdust with a moisture content of "12%" for the production of wood pellets
Why not 11. 99%?
Who uses sawdust with a moisture content of 12%?
Sawdust with a moisture content of 5%-14% is used in the production process.
Obviously, in order to use this machine, you have to have a lab.
If the machine was damaged, could it be that the sawdust didn’t have the right moisture?. . .
The provisions contained in the manual make it impossible to defend his legal remedies in court, as the manufacturer does not acknowledge the complaint and does not see fault on his part.
The manufacturer could not prove in court that it carried out effective tests before placing the apparatus on the market as a pelletizing machine.
The fatigue analysis prints submitted had a date which was after the date of purchase of the machine.
The lack of completeness of the computational and technical documents was blamed on the accomplice who was supposed to be in her possession – unfortunately, he died during the trial and the complete documents were not presented.
If you still want to buy this scrap – welcome
Included in the scope of delivery of the briquetting press are manufacturer documentation, briquetting line, control cabinet and briquettes
For the machine no parts for the production of pellets for the health of the new user and the service life of the machine
The machine is sold as a crank press with briquetting function without pelleting possibility
Pelleting with this machine on your own responsibility – risk of damage to the machine
The machine is sold as defective – Broken body
Netto price for export
NO RETURNS AND ADVISORIES ADOPTED:-)
By the way - not only here. . .
Показать весь комментарий
DE

WEKTOR BT-60
Gebrauchte Brikettpresse zu verkaufen
Electric motor 22kW
Nach Angaben des Herstellers auch geeignet für Holzpellets mit einem Durchmesser von 7-8mm
Polnische, alte Konstruktion BT-60, die seit vielen Jahren in viele Länder der Welt von der Firma Wektor aus Toruń Polen.
Konstruktiv handelt es sich um eine Kurbelpresse, der Hersteller verspricht, dass sie für Briketts und Pellets geeignet ist
Gekauft vom Hersteller im Jahr 2018 als neu mit zwei Jahren Garantie – Gebrauchtkörper – Baujahr 2009, alle anderen Komponenten waren laut Herstellerangaben neu
Die Maschine arbeitete mehrere Monate, je nach Bedarf mehrere Stunden pro Tag – insgesamt weniger als 200 Stunden
Es wurde versucht, 6mm Pellets aus Sägemehl herzustellen
Hersteller lieferte den Benutzer mit 5mm, 6mm, 7mm, 11mm und 60mm Briketthülsen
Ein Teil der Matrizen brach leider während des Gebrauchs und die Schrauben, die die Matrizen befestigen, brachen ab
Während des Ausfalls des Typs der abgebrochenen Schrauben, die die Matrix befestigen, kam es zu Rissen der Hauptformhülse und der seitlichen Materialzufuhrhülse.
Dies sind sehr teure Ausfälle, weil sie benötigen, um den Kauf von ein paar zusätzlichen Teilen zu reparieren
Der Ausfall ereignete sich mehrmals, so dass davon auszugehen ist, dass die Konstruktion der Maschine nicht durchdacht ist.
Das Fehlen der Maschine ist z. B. eine Abreißsicherung, was bei ähnlichen Maschinen üblich ist (die häufig in Kurbelpressen verwendet wird, die nach dem gleichen Prinzip arbeiten)
Durch das Fehlen dieses Geräts entwässern mögliche Fehler die Tasche (zerrissene Befestigungsschrauben der Kopfeinheit, gebrochene Matrizen für Pellets, die zusätzlich im Falle eines Ausfalls der Beschädigung der Form- und Zuführungshülse des bearbeiteten Materials auftreten).
Es gibt keine Bremse des Kurbelsystems, so dass im Falle eines Ausfalls die Vorrichtung durch die Kraft der Trägheit das Anbaugerät des Kopfes vollständig zerstört.
Der Hersteller gibt an, dass der Benutzer für den Ausfall verantwortlich ist, so dass keine Gewährleistungs- und Garantiereparatur oder Rückgabe der Maschine gewährt werden kann.
Nach Angaben des Nutzers ist die Maschine für die Herstellung von 6mm und 8mm Pellets (DIN/ISO) aus Sägemehl völlig ungeeignet.
Der Kaufvertrag enthält ungenaue, mehrdeutige Bestimmungen, die den Käufer während einer Gerichtsverhandlung in eine unterlegene Position bringen.
Es ist unklar, ob eine Maschine ein Prototyp ist oder nicht, der Hersteller war mit dieser Definition vor Gericht nicht einverstanden, aber alles deutet darauf hin, dass der Anwender ein Versuchskaninchen ist. . .
Es ist UNMÖGLICH, Holzpellets der Klasse DIN/ISO herzustellen – Durchmesser 6mm oder 8mm Länge 3,14-40mm
Es gibt keine Möglichkeit, die Länge der Pellets durch einen Brecher zu kontrollieren (es sei denn, das Unternehmen hat bereits einen Weg gefunden oder ist noch in der Testphase – lesen Sie den Prototyp. . . )
Der Hersteller verwendet vage, mehrdeutige Bezeichnungen, d. h. 4-6mm oder 7-8mm, wodurch der Benutzer vor Gericht nicht in der Lage ist, seine Richtigkeit zu beweisen
Der Hersteller fügte unter anderem eine 7mm Lochmatrix hinzu, die 7-8mm Holzpellets herstellen sollte – 7-8 ist kein DIN – DIN ist 6mm oder 8mm
Der Hersteller trotz der Lieferung u. a. der Matrize 6mm bestand darauf, dass er die Maschine zur Herstellung von Pellets min 7-8mm verkauft hat, was auf dem Kaufvertrag, d. h. – gedruckte Aufzeichnung – Durchmesser 6mm und durchgestrichen auf 7mm
Wer kauft die 7mm Pellets?
Wer zertifiziert 7mm Pellets??
Die Maschinenleistung bei der Herstellung von Holzpellets 6mm ist dürftig 180-220kg/h – kein 350kg/h
Der Hersteller lässt Sägemehl mit einem Feuchtigkeitsgehalt “12 %”...
Warum nicht 5-14%?
Die im Handbuch enthaltenen Bestimmungen machen es unmöglich, seine Rechtsbehelfe vor Gericht zu verteidigen, da der Hersteller die Reklamation nicht anerkennt und keine Schuld auf seiner Seite sieht.
Der Hersteller konnte vor Gericht nicht nachweisen, dass er vor dem Inverkehrbringen des Geräts als Pelletiermaschine wirksame Untersuchungen durchgeführt hat.
Die vorgelegten Drucke der Ermüdungsanalyse hatten ein Datum, das nach dem Kaufdatum der Maschine lag.
Die mangelnde Vollständigkeit der rechnerischen und technischen Unterlagen wurde dem Komplizen zugeschoben, der angeblich in ihrem Besitz sein sollte – leider starb er während der Gerichtsverhandlung und die vollständigen Unterlagen wurden nicht vorgelegt.
Wenn Sie trotzdem diesen Schrott kaufen möchten – herzlich willkommen
Für die Maschine keine Teile zur Herstellung von Pellets für die Gesundheit des neuen Benutzers und die Lebensdauer der Maschine
Die Maschine wird als Kurbelpresse mit Brikettierfunktion ohne Pelletiermöglichkeit verkauft
Pelletieren mit dieser Maschine ausschließlich auf eigene Verantwortung – Gefahr von Schäden an der Maschine
Die Maschine wird als defekt verkauft – Gebrochener Körper
Nettopreis pro Export
KEINE RÜCKUNGEN UND WERBUNGEN ANGENOMMEN
Mit dem Rest nicht nur hier
PL

WEKTOR BT-60
Na sprzedaż używana prasa do brykietu
Silnik 22kW
Według producenta nadaje się również do pelletu z trocin o średnicy 7-8mm
Polska, stara konstrukcja BT-60 sprzedawana przez wiele lat do wielu krajów świata przez firmę Wektor z Torunia - producent z Polski.
Konstrukcyjnie jest to prasa korbowa, producent obiecuje że nadaje się do brykietu a również do pelletu
Zakupiona od producenta w 2018 roku jako nowa z dwuletnią gwarancją – korpus używany - rok produkcji 2009 roku, cała reszta podzespołów była według deklaracji producenta nowa
Maszyna przepracowała kilka miesięcy, po kilka godzin dziennie w zależności od potrzeb – łącznie poniżej 200 godzin
Próbowano na niej produkować pellet 6mm z trocin drzewnych
Producent zaopatrzył użytkownika w matryce 5mm, 6mm, 7mm, 11mm i tuleje do brykietu 60mm
Część matryc niestety pękła podczas używania, a śruby mocujące matryce się urywały
Podczas awarii typu urwane śruby mocujące matrycę, dochodziło do pęknięć tulei głównej formującej i bocznej podającej materiał.
Są to bardzo kosztowne awarie bo wymagają do naprawy zakupu kilku dodatkowych części
Do awarii dochodziło kilkukrotnie przez co należy przypuszczać, że konstrukcja maszyny jest nieprzemyślana
Brak w maszynie jest np bezpiecznika zrywkowego, co jest standardem w podobnych maszynach (stosowanego powszechnie w pracujących na tej samej zasadzie prasach korbowych)
Przez jego brak, ewentualne awarie drenują kieszeń (urwane śruby mocujące zespół głowicy, pęknięte matryce do pelletu, występujące dodatkowo w przypadku awarii uszkodzenia tulei formującej i doprowadzającej obrabiany materiał).
Brak jest hamulca układu korbowego przez co w przypadku awarii urządzenie siłą bezwładności dewastuje osprzęt głowicy doszczętnie.
Możliwe, że maszyna się sprawdzi jako brykieciarka, jednak do robienia pelletu 6mm i 8mm ( DIN / ISO ) z trocin drzewnych kompletnie się nie nadaje
Producent twierdzi, że wina za awarie leży po stronie użytkownika, przez co nie można liczyć na rękojmię i naprawę gwarancyjną ani na zwrot maszyny
Według użytkownika maszyna kompletnie nie nadaje się do produkcji pelletu 6mm i 8mm ( DIN / ISO ) z trocin drzewnych
W umowie zakupu zawarte są nieprecyzyjne, niejednoznaczne zapisy, które podczas rozprawy sądowej stawiają kupującego na pozycji przegranej.
Nie wiadomo czy maszyna jest prototypem, czy nim nie jest, producent nie zgadzał się z tą definicją w sądzie, natomiast wszystko wskazuje na to, że użytkownik jest królikiem doświadczalnym...
Uderzenia tłoka w matrycę do pelletu, a co za tym idzie w przednią ścianę korpusu powoduje cykliczne odkształcania sprężyste w okolicach 1-2mm
NIEMOŻLIWE jest produkowanie na maszynie pelletu drzewnego klasy DIN / ISO - średnicy 6mm lub 8mm długości 3,14-40mm
Brak możliwości kontroli długości pelletu poprzez jakikolwiek łamak (chyba, że Firma wymyśliła już sposób albo dalej jest w fazie testów - czytaj prototypu...)
Producent stosuje niejasne, niejednoznaczne oznaczenia tj 4-6mm lub 7-8mm przez co w sądzie użytkownik nie jest w stanie udowodnić swojej racji
Maszyna nie posiada łamaka do pelletu, przez co długość pelletu wychodzi losowa i użytkownik nie jest w stanie jej kontrolować
Producent dodał m,in, matrycę z otworami 7mm, która miała produkować pellet drzewny 7-8mm – 7-8 to nie jest DIN / ISO – DIN / ISO to jest 6mm lub 8mm średnicy i 3,14-40mm długości
Maszyna nie wyprodukuje pelletu drzewnego DIN / ISO 6mm lub 8mm który można certyfikować.
Maszyna z tego względu jest bezużyteczna i jest tylko stratą pieniędzy
Producent mimo dostarczenia m.in matrycy 6mm upierał się, że sprzedał urządzenie do produkowania pelletu min 7-8mm, co jest widoczne na umowie zakupu tj – wydrukowany zapis - średnica 6mm i przekreślona na 7mm
W umowie zakupu napisane jest co innego, a co innego reklamy producenta, obiecującego nawet średnice pelletu drzewnego 4-6mm
Producent upiera się, że sprzedał maszynę do pracy z matrycą 7mm – tylko kto kupuje pellet 7mm?? Kto certyfikuje pellet 7mm??
Wydajność maszyny przy produkcji pelletu drzewnego 6mm to marne 180-220kg/h – producent obiecuje nawet ok 350kg/h co jest niezgodne z prawdą
Producent każe stosować do produkcji pelletu drzewnego trocinę o wilgotności "12%"
A dlaczego nie 11,99%?
Kto do produkcji używa trociny o wilgotności 12%?
Do produkcji używa się trocin o wilgotności 5%-14%
Do używania tej maszyny najwidoczniej należy posiadać laboratorium
Skoro została uszkodzona maszyna, to może trocina miała nieodpowiednią wilgotność??
Zapisy zawarte w instrukcji uniemożliwiają skuteczną obronę swoich racji w sądzie, gdyż producent nie uznaje reklamacji i nie widzi winy po swojej stronie.
Producent nie udowodnił w sądzie, że przeprowadził skuteczne badania przed wprowadzeniem urządzenia na rynek jako pelleciarkę.
Przedstawione wydruki analizy zmęczeniowej posiadały datę późniejszą niż data zakupu maszyny.
Brak kompletności dokumentacji obliczeniowej i technicznej zrzucono na wspólnika, który podobno miał być w ich posiadaniu – niestety zmarł podczas rozprawy sądowej i pełna dokumentacja nie została przedstawiona
Jeśli mimo powyższego chcesz zakupić ten złom – zapraszam
W zestawie z brykieciarką jest dokumentacja producenta, tor do odbioru brykietu, szafka sterująca i tuleje do brykietu
Do maszyny brak części do produkcji pelletu w trosce o zdrowie nowego użytkownika i żywotność maszyny
Maszyna sprzedawana jako prasa korbowa z funkcją brykietowania bez możliwości pelletowania
Pelletowanie za pomocą tej maszyny wyłącznie na własną odpowiedzialność - grozi uszkodzeniem maszyny
Maszyna sprzedawana jako uszkodzona – pęknięty korpus
Cena netto na export
NIE PRZYJMUJE SIĘ ZWROTÓW I REKLAMACJI :-)
Z resztą nie tylko tu..